6 inch Encapsulated Motors
Franklin Electric 6-inch encapsulated motors, manufactured in ISO 9001 certified facilities, are built for dependable operation in 6-inch diameter or larger water wells. Water lubricated thrust and radial bearings enable a maintenance free operation.
A special diaphragm ensures pressure compensation inside the motor.The motor is filled with a special FES91 fluid, providing frost protection down to -15 °C storage temperature.
£2,270.00 - £9,082.00
- Franklin Electric
- Hermetically sealed stator, anti track, self healing stator resin prevents motor burn out
- 37 and 45 kW Motors up to 50 °C ambient temperature
- Removable “Water Bloc” lead connector
- High efficiency electrical design for low operation cost
- Max. storage temperature -15 °C - + 60 °C
£3,987.00 - £13,416.00
- Franklin Electric
- Hermetically sealed stator, anti track, self healing stator resin prevents motor burn out
- 37 and 45 kW Motors up to 50 °C ambient temperature
- Sand fighter® Motor with SiC-Mechanical Seal
- All motors prefilled and 100% tested
- Max. storage temperature -15 °C - + 60 °C
£3,375.00 - £14,215.00
- Franklin Electric
- Hermetically sealed encapsulated stator, anti track, self healing stator resin
- High temperature up to max. 90 °C ambient temperature
- Sand fighter® Motor with SiC-Mechanical Seal
- All motors prefilled and 100% tested
- Max. storage temperature -15 °C - + 60 °C
CALL US: +44(0)1473 462046
- Ratings: 3 Phase DOL; 4 - 45 kW, 380V / 100Hz, 3000 U/min
- Thrust load: 15.5 kN: 4 - 22 kW, 27.5 kN: 26 - 45 kW
- Nominal ambient temperature: 30 °C
- Cooling flow
- 4 - 22 kW: with 0.16 m/s cooling flow
- > 22 kW: with 0.5 m/s cooling flow
- Protection IP68 and insulation class F
- Frequency of starts: 20 starts/hour (with min. 3 minutes resting time), equally distributed
- Vertical and horizontal operation, shaft upwards
- Rotation counter clock wise facing shaft end (Rotation reversible)