Geoquip Water SolutionsWater Solution Specialists
Search:

6 inch Franklin Electric E-tech Encapsulated Submersible Motors.

Franklin Electric E-tech 6" encapsulated motors, manufactured in ISO 9001 certified facilities, are built for dependable operation in 6" diameter or larger water wells.

Water lubricated thrust and radial bearings enable a maintenance free operation. A special diaphragm ensures pressure compensation inside the motor. The motor is filled with a special FES91 fluid, providing frost protection down to -15 °C storage temperature.

The Sand fighter® SiC seal system is standard.

           

4 Items
6 inch 3p Encapsulated Pump Motor 304SS Franklin Electric
6 inch 3p Encapsulated Pump Motor 304SS Franklin Electric
£2,270.00  -  £9,082.00
  • Franklin Electric
  • Hermetically sealed stator, anti track, self healing stator resin prevents motor burn out
  • 37 and 45 kW Motors up to 50 °C ambient temperature
  • Removable “Water Bloc” lead connector
  • High efficiency electrical design for low operation cost
  • Max. storage temperature -15 °C - + 60 °C
6 inch 3p Encapsulated Pump Motor 316SS Franklin Electric
6 inch 3p Encapsulated Pump Motor 316SS Franklin Electric
£3,987.00  -  £13,416.00
  • Franklin Electric
  • Hermetically sealed stator, anti track, self healing stator resin prevents motor burn out
  • 37 and 45 kW Motors up to 50 °C ambient temperature
  • Sand fighter® Motor with SiC-Mechanical Seal
  • All motors prefilled and 100% tested
  • Max. storage temperature -15 °C - + 60 °C
6 inch 3p Encapsulated Pump Motor High Temperature 90dc Franklin Electric
6 inch 3p Encapsulated Pump Motor High Temperature 90dc Franklin Electric
£3,375.00  -  £14,215.00
  • Franklin Electric
  • Hermetically sealed encapsulated stator, anti track, self healing stator resin
  • High temperature up to max. 90 °C ambient temperature
  • Sand fighter® Motor with SiC-Mechanical Seal
  • All motors prefilled and 100% tested
  • Max. storage temperature -15 °C - + 60 °C
6'' Permanent Magnet PM encapsulated motor Franklin Electric
6" Permanent Magnet PM encapsulated motor Franklin Electric
CALL US: +44(0)1473 462046
  • Ratings: 3 Phase DOL; 4 - 45 kW, 380V / 100Hz, 3000 U/min
  • Thrust load: 15.5 kN: 4 - 22 kW, 27.5 kN: 26 - 45 kW
  • Nominal ambient temperature: 30 °C
  • Cooling flow
  • 4 - 22 kW: with 0.16 m/s cooling flow
  • > 22 kW: with 0.5 m/s cooling flow
  • Protection IP68 and insulation class F
  • Frequency of starts: 20 starts/hour (with min. 3 minutes resting time), equally distributed
  • Vertical and horizontal operation, shaft upwards
  • Rotation counter clock wise facing shaft end (Rotation reversible)